Sample Concentrator (96–gas-needles) LX722SC Sample Concentrator mainly used for concentering and preparing samples in batch. It works by concentrating blowing nitrogen in the surface of sample which is being heated to accelerate evaporating and separating the solvent without oxygen
Sample capacity | 1 standard block |
Power | 400 W |
Dimension ( W x D x H ) | 220 x 260 x 445 mm |
Heating speed | ≤ 30 min ( 40 ˚C to 150 ˚C ) |
Temperature control range | RT 5˚C ~ 150˚C |
Temperature setting range | 5˚C ~ 150˚C |
Temperature stability ( 40 °C ~ 100 °C ) | ≤ ± 0.5 ˚C |
Temperature stability ( 100 °C ~ 150 °C ) | ≤ ± 1 ˚C |
Block temperature uniformity ( 100 °C ) | ≤ ± 0.5 ˚C |
Block temperature uniformity ( 150 °C ) | ≤ ± 1 ˚C |
Temperature display accuracy | 0.1 ˚C |
Time range | 1 min ~ 99 h 59 min or continuous |
Maximum needle plate lift stroke | 275 mm |
Gas-in joint outer diameter | Φ 7 mm |
Nitrogen pressure | ≤ 0.1 MPa |
Nitrogen flow rate | 0 ~ 10 L / min |
Needle length | 80 mm |
Voltage | AC 220 V / AC 110 V, 50 / 60 Hz |
Fuse | 250 V, 3 A / 6 A, ϕ 5 × 20 |
Weight | 5.5 kgs |
Independently controllable gas needle
Combinational working of dry heat bath and nitrogen blow surface
Interchangeable optional blocks
LED displays immediate temperature and diminishing time
Operation is simple and convenient
The height of the air cavity can be adjusted. The length of a standard gas needle is 80mm
Optional flow regulating valve
Accessory No | Specifications | Hole diameter | Hole bottom shape | Block dimension |
SC01 | 0.2 mm x 96 | 6.7 mm | Cone bottom | 95.5 x 153.5 x 35.5 mm |
SC02 | Flat Bottom Plates | Top Size 76 x 116 x4mm | Flat Plate Block | 95.5 x 153.5 x 22.5 mm |
Related Products