Sample concentrator (visible) LX721SC is a concentrator with a temperature control range of and heating speed of ≤30 mins. It accelerates the concentration of samples by blowing nitrogen gas in the surface of the sample which is being heated to accelerate evaporating and separating the solvent in the samples without oxygen. It is mainly used for concentrating or preparing samples in batches. Such as drug screening, hormone analysis, liquid phase and mass spectrometry in the analysis of sample preparation.
| Sample capacity |
1 Standard visible block |
|---|---|
| Power |
400 W |
| Dimension (W x D x H) |
220 x 260 x 525 mm |
| Heating speed |
≤ 30 min (40 ˚C to 150 ˚C) |
| Temperature control range |
RT 5˚C ~ 150˚C |
| Temperature setting range |
5˚C ~ 150˚C |
| Temperature stability (40 °C ~ 100 °C) |
± 0.5 ˚C |
| Temperature stability (100 °C ~ 150 °C) |
± 1 ˚C |
| Block temperature uniformity (100 °C) |
± 0.5 ˚C |
| Block temperature uniformity (150 °C) |
± 1 ˚C |
| Temperature display accuracy |
0.1 ˚C |
| Time range |
1 min ~ 99 h 59 min |
| Maximum needle plate lift stroke |
285 mm |
| Gas-in joint outer diameter |
Φ 7 mm |
| Nitrogen pressure |
≤ 0.1 MPa |
| Nitrogen flow rate |
0 ~ 10 L / min |
| Needle length |
150 mm |
| Voltage |
AC 220 V / AC 110 V, 50 / 60 Hz |
| Fuse |
250 V, 3 A / 6 A, ϕ 5 × 20 |
| Weight |
6 kg |
| Accessory No | Specifications | Hole diameter | Hole bottom shape | Block dimension |
| SC01 | 10 mm x 12 | 10.5 mm | Round bottom | 153.5 x 95.5 x 50 mm |
| SC02 | 12 mm x 12 | 12.5 mm | Round bottom | 153.5 x 95.5 x 50 mm |
| SC03 | 13 mm x 12 | 13.5 mm | Round bottom | 153.5 x 95.5 x 50 mm |
| SC04 | 15 mm x 12 (7ml tube) | 15.5 mm | Round bottom | 153.5 x 95.5 x 50 mm |
| SC05 | 16 mm x 12 (10ml/15ml tube) | 16.5 mm | Round bottom | 153.5 x 95.5 x 50 mm |
| SC06 | 19 mm x 12 | 19.5 mm | Round bottom | 153.5 x 95.5 x 50 mm |
| SC07 | 20 mm x 12 | 20.5 mm | Round bottom | 153.5 x 95.5 x 50 mm |
