Sample Concentrator LX722SC
Description
Sample Concentrator (96–gas-needles) LX722SC Sample Concentrator is mainly used for concentrating and preparing samples in batches. It works by concentrating blowing nitrogen on the surface of the sample which is being heated to accelerate evaporation and separate the solvent without oxygen.
Specifications
| Sample capacity |
1 Standard plate block |
|---|---|
| Power |
400 W |
| Dimension (W x D x H) |
220 x 260 x 445 mm |
| Heating speed |
≤ 30 min (40 ˚C to 150 ˚C) |
| Temperature control range |
RT 5˚C ~ 150˚C |
| Temperature setting range |
5˚C ~ 150˚C |
| Temperature stability (40 °C ~ 100 °C) |
± 0.5 ˚C |
| Temperature stability (100 °C ~ 150 °C) |
± 1 ˚C |
| Block temperature uniformity (100 °C) |
± 0.5 ˚C |
| Block temperature uniformity (150 °C) |
± 1 ˚C |
| Temperature display accuracy |
0.1 ˚C |
| Time range |
1 min ~ 99 h 59 min |
| Maximum needle plate lift stroke |
275 mm |
| Gas-in joint outer diameter |
Φ 7 mm |
| Nitrogen pressure |
≤ 0.1 MPa |
| Nitrogen flow rate |
0 ~ 10 L / min |
| Needle length |
80 mm |
| Voltage |
AC 220 V / AC 110 V, 50 / 60 Hz |
| Fuse |
250 V, 3 A / 6 A, ϕ 5 × 20 |
| Weight |
5.5 kg |
Features
- Independently controllable gas needle
- Combinational working of dry heat bath and nitrogen blow surface
- Interchangeable optional blocks
- Promotes rapid evaporation of the solution and concentration of the sample
- LED displays immediate temperature and diminishing time
- Built-in overheat protection, automatic fault detection and fault beep alarm devices
- Complete equipment can be kept in a ventilation cabinet when the concentrated sample is in toxic solvents
- Operation is simple and convenient
- The height of the air cavity can be adjusted. The length of a standard gas needle is 80mm
Applications
- Used for enrichment of large-volume sample or preparation such as drug screening, hormone analysis, liquid phase, and mass spectroscopy in the analysis of sample preparation.
Optional Accessories
| Accessory No | Specifications | Hole diameter | Hole bottom shape | Block dimension |
| SC01 | 0.2 mm x 96 | 6.7 mm | Cone bottom | 95.5 x 153.5 x 35.5 mm |
| SC02 | Flat Bottom Plates | Top Size 76 x 116 x 4 mm | Flat Plate Block | 95.5 x 153.5 x 22.5 mm |
| Optional flow regulating valve |
- 71-75 Shelton Street Covent Garden, London WC2H 9JQ UK.
- Email: info@labdex.com | Website: www.labdex.com