Analytical Ferrograph LX100AFG is a portable instrument that uses electromagnetic induction to quantify ferromagnetic wear particles in oil samples. It provides rapid, accurate, and repeatable measurements with results displayed in mg/l or ppm. No sample pretreatment or organic solvents are required. It is ideal for lubricant condition monitoring, wear analysis, and predictive maintenance across industrial sectors.
| Detection range | 0 - 5500 ppm |
|---|---|
| Sampling volume | 2 ml |
| Accuracy | ± 3% |
| Detection speed | < 5 Sec |
| Display | 7 Inch touchscreen |
| Resolution | 1 ppm |
| Detection accuracy | ± 3% |
| Outputs | ferromagnetic particle content, ferromagnetic particle concentration |
| Data storage | 32 GB |
| Battery capacity | 3400 mAh |
| Net weight | 6 Kg |
| Packing dimension | 440 x 180 x 350 mm |
| Gross weight | 10 Kg |
Rapid quantification of ferrous debris in oil samples
High sensitivity with resolution down to 1 ppm
Strong correlation with iron concentration and particle size
High measurement accuracy and repeatability
No sample pretreatment or organic solvents required
Fast analysis with results available within seconds
Direct concentration readout in mg/l or ppm
Suitable for lubricating oils and grease samples
Used for rapid detection and quantification of ferromagnetic wear particle analysis and lubricating oils and greases analysis, condition monitoring in defense, aerospace, marine, power, petrochemical, metallurgy, mining, and transportation industries.