Automatic Potentiometric Titrator LX216APT is a high-precision analytical device featuring dead-stop, conductometric, photometric, and temperature titration analysis. It provides accurate measurements of pH, potential, and ion concentration with excellent repeatability and a wide measurement range. Equipped with a 7-inch touchscreen and multiple connectivity interfaces, it enables efficient data management and user-friendly operation. It is ideal for laboratories requiring reliable, compliant, and customizable titration solutions.
| Measurement range | mV: (- 2000.00 to 2000.00) pH: (- 5.000 to 20.000) pX: (- 2.000 to 20.000) Ion: (1.000 x 10⁻⁹ to 9.999 x 10⁹) μg/L mg/L, g/L, mol/L, mmol/L, ppm, ppb |
|---|---|
| Resolution | pH: 0.001 pH pX: 0.001 pX Ion: Up to 4 digits mV: 0.01 mV |
| Measurement mode | pH, pX, Potential, Ion concentration |
| Titrating mode | Dynamic, pre-set, constant and manual |
| Temperature measurement range | - 10.0 to 135.0°C |
| Temperature resolution | 0.1°C |
| Temperature measurement error | ± 0.1°C |
| Burette | 5 ml, 10 ml (Standard) and 20 ml |
| Resolution of burette | 1 / 480000 |
| Time of replenishing liquid | 0.01 ml / Seconds to 9.99 ml / seconds, Adjustable |
| Control unit | PC Software |
| Display | 7-Inch Touch color screen |
| Interface | USB, RS232 |
| Power supply | AC 80 - 250 V, 47 - 63 Hz |
| External dimension | 240 x 370 x 270 mm |
| Net weight | 4 Kg |
| Packing dimension | 570 x 540 x 530 mm |
| Gross weight | 15 Kg |
Four-level user access control with password protection
Built-in potentiometric titration methods with storage for up to 200 methods
Supports both upper and lower stirrers
Multiple titration modes, including DET, MET, SET etc
Real-time display of test methods, with formula editor
pH and Ion calibration with 1–3 points and automatic standard buffer recognition
Automatic electrode diagnostics with pH slope and offset display
Multiple measurement units, including μg/L, mg/L, g/L, mmol/L, pX, ppm, and ppb
Supports direct reading, standard addition, and GRAN measurement modes
More than 10 built-in ion measurement methods
Stores up to 1,000 data sets
RS-232 and USB Interface for printer connectivity
USB Flash drive support for importing and exporting methods in CSV or PDF formats
Supports barcode scanners and balances on specific models
It is widely used in pharmaceuticals, chemicals, food and beverage, environmental monitoring, water treatment, petroleum, and research laboratories. Its high accuracy, automation, and support for multiple titration methods make it suitable for quality control, compliance testing, research, and routine laboratory analysis, ensuring reliable and reproducible results for both simple and complex samples.
10 ml Burette x 1 Pc
pH Indicator electrode x 1 Pc
Platinum electrode x 1 Pc
Silver electrode x 1 Pc
Reference electrode x 2 Pcs
Temperature probe x 1 Pc
NIST pH standard powder (4.01, 7.00, 10.01) x 5 Packs
Automatic Potentiometric Titrator
Labdex Automatic Potentiometric Titrator provides precise, reliable, and fully automated titration for chemical, pharmaceutical, and research labs, ensuring accurate, consistent, and reproducible results with ease of use and efficiency.
- Measurement range: 0 ~ ± 1400 mV, 014.00 pH
- Resolution: 1 mV, 0.01 pH
- Accuracy: pH: ± 0.03 pH; mV: ± 5 mV
- Measurement range: -1800.0 ~ 1800.0 mV, 0.00 ~ 14.00 pH
- Resolution: 1 mV, 0.01 pH
- Accuracy: pH: ± 0.01; mV: ± 0.03% FS
- Measurement range: -2000.0 ~ 2000.0 mV, 0.00 ~ 20.00 pH
- Resolution: 0.01 mV, 0.001 pH
- Accuracy: pH: ± 0.002 pH mV: ± 0.03% or ± 0. 2 mV
- Volume range: 0.01 ml to 99.99 ml
- Volume accuracy: R = 0.2%, CV = 0.07%
- Max position lift: 10 ml
- Measurement range: mV: -2000 ~ 2000 mV <br/> pH: 0 - 14 pH
- Resolution: mV: 0.1 mV <br/> pH: 0 - 14 pH
- Error: mV: ± 0.25% / Fs <br/> pH: ± 0.01 pH
- Measurement range: mV: ± 1999 mV <br/> pH: 0.00 ~ 14.00 pH
- Measurement resolution: mV: 0.1 <br/> pH: 0.01
- Titration volume accuracy: 0.01 ml
- Measurement range: mV: ± 1,999 mV <br/> pH: 0.00 ~ 20.00 pH
- Measurement resolution: mV: 0.1 <br/> pH: 0.001
- Stability: ± 0.3 mV / 3h
- Measurement range: mV: -2000.0 ~ + 2000.0 <br/> pH: -20.000 ~ + 20.000
- mV measurement: Resolution: 0.1 mV <br/> Precision: 0.1 mV, ± 0.03%
- pH measurement: Resolution: 0.001 pH <br/> Precision: 0.003 pH
Karl Fischer Titrator
Labdex Karl Fischer Titrators provide precise and reliable moisture analysis with high-accuracy burettes, intuitive touchscreen and keypad operation, and real-time monitoring for diverse laboratory applications.
- Titration method: Volumetric titration
- Measurement range: 30 ppm - 100%
- Moisture display resolution: 1 ppm
- Titration method: Volumetric titration
- Measurement range: 10 ppm - 100%
- Moisture display resolution: 1 ppm
- Titration method: Volumetric titration
- Titration mode: Positive titration
- Measurement range: 0.001% - 100%
- Titration method: Volumetric titration
- Measurement range: 0.1 mg - 250 mg
- Polarization current accuracy: 0.1 mg
- Titration method: Coulometric titration
- Measurement range: 0 µg - 20 µg
- Precision: 3 μg - 1000 μg ≤ ± 3 μg <br/> ≥1000 μg ≤ ± 0.2%
- Titration method: Coulmetric titration
- Measurement range: 10 µg - 20 mg
- Polarization current accuracy: ± 0.2 µA
- Titration method: Volumetric and Coulometric titration
- Measurement range of volumetric titration: 0.1 mg - 250 mg
- Polarization current accuracy of volumetric titration: 1 µA ± 0.2 µa, 50 µA ± 10 µA
- Titration method: Coulometric titration
- Measurement range: 3 µg - 1000 mg (H₂O)
- Electrolysis current range: 0 - 400 mA