Dissolved Gas Analyzer LX100DGA is designed with an advanced three-detector system, enabling complete analysis of the total dissolved gas content in insulating oil using a single sample injection. It accurately detects key gases including hydrogen, methane, ethylene, ethane, acetylene, carbon monoxide, and carbon dioxide, supporting effective condition monitoring of insulating oils.
| Detector |
FID, TCD |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Minimum detection concentration (μl/L) |
|
||||||||||||||
| Sampler |
Packed column sampling, Capillary sampling, Six-port valve gas sampling |
||||||||||||||
| Display |
8 Inch color LCD touch screen |
||||||||||||||
| Temperature Control Range |
Above room temperature, 4°C - 450°C |
||||||||||||||
| Temperature Increment |
1°C |
||||||||||||||
| Temperature Accuracy |
± 0.1°C |
||||||||||||||
| Temperature Control Area |
8 Channels |
||||||||||||||
| Programmed Temperature Rising Rate |
0.1 - 60°C/Min |
||||||||||||||
| Sampling Start |
Manual |
||||||||||||||
| FID Detection Limit |
≤ 5 x 10ˉ¹² g/s (Cetane/Iso octane ) |
||||||||||||||
| FID Baseline noise |
≤ 0.07 PA |
||||||||||||||
| FID Baseline drift |
≤ 0.2 PA/30 Min |
||||||||||||||
| FID Linear range |
≥ 10⁶ |
||||||||||||||
| TCD Sensitivity |
S ≥ 10000 mV x ml/mg (Benzene/Toluene) |
||||||||||||||
| TCD baseline noise |
≤ 20 μV |
||||||||||||||
| TCD baseline drift |
≤ 30 μV/30 Min |
||||||||||||||
| TCD linear range |
≥ 10⁴ |
||||||||||||||
| Interface |
Ethernet, IEEE802.3 |
||||||||||||||
| Power supply |
220 V, 50 Hz |
||||||||||||||
| External dimension |
690 x 610 x 490 mm |
||||||||||||||
| Net weight |
55 Kg |
||||||||||||||
| Packing dimension |
790 x 690 x 740 mm 720 x 600 x 540 mm 570 x 440 x 460 mm |
||||||||||||||
| Gross weight |
170 Kg |
