Non-Refrigerated Circulation Water Bath LX250NCW is a circulating water bath both internally and externally equipped with a PID microprocessor temperature controller. The dynamic self-diagnostic control technology helps to prevent any failures or damage to the equipment as well as makes detection easy.
| Chamber volume | 10 L |
| Temperature control range | Room temperature +5℃~99℃ |
| Temperature accuracy | ±0.1℃ at 37℃ |
| Temperature fluctuation | ±0.1℃ |
| Temperature uniformity | ±0.2℃ at 37℃ |
| Timer | 1min-99hr |
| Power | 750W |
| Power supply | 220V / 50Hz |
| Internal dimensions | 250 x 200 x 200 mm |
| External dimensions | 300 x 360 x 360 mm |
| Net weight | 13 kg |
| Packing dimensions | 440 x 440 x 440 mm |
| Gross weight | 18 kg |
(Internal material) 304 stainless steel working chamber and (external material) powder-coated steel housing
Equipped with an internal cycled water pump (internal circulation) and external cycle interface for output of constant temperature water supply (external circulation)
LED display, soft touch, PID microprocessor with high-speed and performance CPU chip temperature controller
High-sensitivity and precision Pt resistance sensor
Preset programmed control with timing range up to 99 hours for power-on, power-off and working
Multiple alarms for sensor failure, high/low-temperature deviation, over temperature
Can store the parameters given in the memory
Temperature display calibration
Related Products
