Non-Refrigerated Independent Temperature Water Bath LX150NTW is a water bath having three independent temperature control holes opted for auxiliary heating. The dynamic self-diagnostic control technology helps to prevent any failures or damage to the equipment as well as makes detection easy.
| Chamber volume | 2L/hole x 3holes |
|---|---|
| Temperature control range | Room temperature +5℃~100℃ |
| Temperature accuracy | ±0.1℃ at 37℃ |
| Temperature fluctuation | ±0.3℃ |
| Temperature uniformity | ±0.5℃ at 37℃ |
| Timer | 1min-99hr |
| Power | <800W |
| Power supply | 220V / 50Hz |
| Internal dimensions | (152 x 126 x 110)*3 mm |
| External dimensions | 490 x 240 x 290 mm |
| Net weight | 9 kg |
| Packing dimensions | 530 x 340 x 360 mm |
| Gross weight | 13 kg |
(Internal material) 304 stainless steel working chamber and (external material) powder-coated steel housing
Three holes with independent temperature control each
LED display, soft touch, PID microprocessor with high-speed and performance CPU chip temperature controller
High-sensitivity and precision Pt resistance sensor
Preset programmed control with timing range up to 99 hours for power-on, power-off and working
Multiple alarms for sensor failure, high/low-temperature deviation, over temperature
Can store the parameters given in the memory
Temperature display calibration
Used in scientific research, medical and industry to provide precise and constant temperature and auxiliary heating for gene amplification.
