Mini Sample Concentrator LX620MSC is mainly used for the concentration or preparation of bulk samples. Working principle by blowing nitrogen into the surface of the heated sample, the solvent in the sample is quickly evaporated and separated, thereby achieving the purpose of anaerobic concentration of the sample and keeping the sample pure.
| Sample capacity | 1 Standard block |
|---|---|
| Power | 60 W |
| Dimension (W x D x H) | 110 x 156 x 400 mm |
| Temp. Range | RT +5˚C ~ 100˚C |
| Temperature accuracy (100 °C) | ± 0.5 ˚C |
| Temperature accuracy (40 °C) | ± 0.3 ˚C |
| Heating time | ≤ 12min (From 40 ˚C to 100 ˚C) |
| Time range | 1 sec ~ 999 s or 1min 0~999min |
| Nitrogen flow rate | 0~10L/Min |
| Nitrogen pressure | ≤ 0.1 Mpa |
| Weight | 1.2 kg |
Unique air control patent design, enhance air tightness and reduce the risk of leakage
The height of air chamber can be adjusted. The length of standard glass needle is 150mm
Separately blow of 6 needles and flow regulating of each needle are available to avoid gas leakage
LED displays immediate temperature and diminishing time
Standard configured of cavity and diminishing bracket
Built-in overheat protection, automatic fault detection and fault beep alarm devices
Complete equipment can be kept in a ventilation cabinet when the concentrated sample is in toxic solvents
Blocks can be optional and exchanged
Used for concentrating or preparing samples in batches. Such as drug screening, hormone analysis, liquid phase and mass spectrometry in the analysis of sample preparation.
| Accessory No | Tube Quantity & Dia. of Hole |
| SC01 | 6 x Φ15 mm |
| SC02 | 6 x Φ16 mm |
| Optional flow regulating valve |
